Product Information
NXT AquaGuard is a 100% waterproofing membrane designed for application on a multitude of surfaces to protect against water ingress and weathering.
Based on a hybrid technology, NXT AquaGuard can be used on both vertical and horizontal surfaces as a high strength weatherproof protective membrane with high build elastomeric functionality.
NXT AquaGuard provides an excellent flexible protective coating with good breathability.
NuTech’s proprietary resin technology provides a hard, yet flexible surface with nano-technology for added water beading and contamination resistance for the life of the coating.
Unlike conventional elastomeric roof coatings, NXT AquaGuard will stay cleaner for longer and remain 100% waterproof under seasonal ponding water conditions.
APPLICATION AND USAGE AMOUNT*
Use 1.25 Gal of NXT AquaGuard Per 100 Sq. Ft. over a NuTech primer such as NXT GP Primer or NuPrime (Ask a sales associate for details).
1. Apply 2 even coats of NXT AquaGuard to a NuTech Primer within 24 hours using an airless sprayer (Graco Magnum X5 or X7) with a 619 or 621 spray tip.
2. Reinforce keyways, penetrations, and other suspect areas prior to applying top coat of NXT
AquaGuard is highly recommended.
*Usage amount will vary depending upon how old or dry the surface is.
Mixing and Storing Procedures
No thinning or reducing is necessary. Product may separate over time. Use a power mixer or paint stick to quickly stir coating before use. Carefully reseal container after every use.
Technical Information
- Waterproof: 100%
- Recoat: 12-15 years
- Solids by Volume: >40%
- Dirt Resistance: Excellent
- VOC: Extremely Low
- Classification: Non-flammable
- Clean-Up Soap and Water
Project Calculator
Calculations are estimates only. Additional materials may be required dependent on roof condition and other factors.